Exterior Finish & Siding Quality Control Checklist Please review this list and check mark each item to confirm completion. Mark N/A (not applicable) if it was not part of your specs or was not needed for this project. Jobsite and/or Address*Company*Prior to trim and siding installation, siding contractor will provide & install “infiltration barrier” per local building code as air & moisture control✔︎N/ACheck soffit installation for tight end and lateral joints, and vents to provide adequate ventilation for attic✔︎N/ACheck corner boards for fit to soffit and tight against building✔︎N/ACheck window & door trim for joint fit, tight against building and window frame✔︎N/ACheck cornice for tight joints at soffit and fascia with proper flashing to prevent water damage✔︎N/AConfirm print/specs for siding material✔︎N/ACheck siding installed per manufacturers installation instructions✔︎N/ACheck all necessary areas for latex caulk per applicable building code✔︎N/ANails should be flush and minimal seams on siding✔︎N/AI confirm that all checklist items listed have been reviewed prior to submitting this form.*YesNo (please describe in notes)Notes and any additional information you would like to submit:Name* First Last Date*