Rough Framing Quality Control Checklist Please review this list and check mark each item to confirm completion. Mark N/A (not applicable) if it was not part of your specs or was not needed for this project. Jobsite and/or Address*Company*Check that the walls are located per the plans✔︎N/ACheck framing requirements of plumber to allow for layout of joists and studs to minimize cutting and call-backs✔︎N/ACheck framing requirements of plumber to allow for layout of joists and studs to minimize cutting and call-backs✔︎N/AReframe any plumbing cutouts as necessary✔︎N/ACheck walls for straightness, plumb, & square; correct size lumber for studs and headers✔︎N/ACheck window and door openings; dimensions, plumb, square✔︎N/ACheck all warped studs removed or straightened✔︎N/ACheck garage door jamb & trim mold installed properly✔︎N/ACheck trusses erected according to engineered design and installation instructions✔︎N/ACheck for proper clearance around chimney✔︎N/ACheck framing for moisture content; beware of excessively moist conditions which will contribute to high humidity in house during drying✔︎N/ACheck studs for irregularities in wall line; make partial cuts in studs to straighten wall line✔︎N/ACheck backing in walls and ceiling for nailing✔︎N/ACheck rough openings for square, plumb, level, size✔︎N/AConfirm walls are straight behind countertops✔︎N/ACheck windows installed per manufacturers installation instructions✔︎N/AWindows checklist 1.) Window frame secure against building 2.) Gap around window frame consistent on all sides 3.) Windows open and close smoothly 4.) Reveal at open window to be consistent 5.) Check that jamb is same dimension at top, middle and bottom 6.) Check that there are no scratches on glass I confirm that all checklist items listed have been reviewed prior to submitting this form.*YesNo (please describe in notes)Notes and any additional information you would like to submit:Name* First Last Date*